Having trouble? Click here to access our troubleshooting guide.
THIS FAULT IS : CH THERMISTER FAILURE, THE FOLLOWING SHOULD BE CHECKED
The thermistor can be checked for resistance, please see the table below.
If the resistance checks show a good reading then the harness should be checked.
Heating (NTC) Thermistor – 12K ohms @ 20c
Disclaimer: Whilst every attempt is made to ensure the accuracy of information contained on this help centre, errors can occasionally occur. The Vaillant Group cannot accept any responsibility for any reliance upon such information, any omissions or any subsequent loss or damage.Vaillant Group recommends that only qualified, gas safe registered engineers carry out repairs, installation or servicing.Vaillant Group reserves the right to amend , update, or withdraw any information within the help centre without prior notice.
All Images and content in this help centre is a copyright of Vaillant and must not be reproduced without the express permission of Vaillant Group. Such permission may be obtained by emailing servicevisit@vaillant.com with details of proposed usage.
Gas safe register is a registered trademark of the HSE and is used under license.